Compatible for Panasonic Cutting Torch

PRODUCTS

CONTACT US

Email : sales@huarui-cn.com

Address : Xiazhuang Caoqiao Xueyan Town, Wujin District, Changzhou, Jiangsu, China

Phone : +86-0519-82916066-8019/8016

Home > Products > Plasma Torch & Consumables > Compatible for Panasonic Cutting Torch >

For Panasonic P80 Manual Plasma Cutting Torch
Features:
1. Huarui Plasma Torch, with novel appearance, is lightweight and comfortable. It is ergonomically designed with good heat resistance and flame retardant characteristics.
2. Huarui welding cable is produced based on international standard with accurate square meters.
3. Huarui spare parts are manufactured by advanced imported equipment ---Lean Production
4. Huarui universal ball joint allows welder flexible operation during working.
5. Huarui’s each plasma torched must pass the following tests: Insulation resistance test, High voltage test, Air flow test, Gas seal test, Cutting test.
Item Plasma Cutting Torch  P80 Compatible for Panasonic
Rating 80 Amps @ 60 Duty Cycle Cutting Capacity: 35mm Max(most materials)                            
Gas: 0.35-0.45 litres Mpa
Rear Connector 3/8'' BSP, M16*1.5
Certification ISO9001, CCC, CE, ROHS, TUV
Packing 1set/box neutral packing, 5sets/Carton Box
   
Plasma Cutting Spare Parts: Torch head, Tip, Electrode, Swirl Ring, Gas Diffuser, Nozzle Retaining Cap
A. HRYT-10PD Torch Head -Hand
B. R TKV0005 Handle c/w Switch
A1 Torch Head - Hand
B1  Handle c/w Switch
C1. HRYT-10PE Torch Head - Machine
C2. HRTKC06102 Handle-Machine
1. HRTET02033 Electrode,harfnium
2 Tip, 1.1mm 40A 
    HRTET01310 Tip, 1.3mm 63A
    HRTET01512 Tip, 1.5mm 80A
    HRTSM06626 Tip, 1.7mm 100A
2A. HRTET01035 Old Style Nozzle 1.3mm, 63A
      HRTET01507 Old Style Nozzle 1.5mm, 80A
      HRTET01809 Old Style Nozzle 1.7mm, 100A
3. TGN02004 Nozzle Retaining Cap, ceramic

MESSAGE BOARD